It's the last day of the Christmas in July Blog Hop and that means it's my day to post!
I'm sharing today with Christina, so be sure to check out her post
Christina @ Christina's Handicrafts
Thanks to Sarah over a Confessions of a Fabric Addict for organizing this hop. It's been really fun and my mind is swirling with ideas for Christmas gifts to make. :-)
Here's the entire line-up, in case you're like me and missed some earlier days.
SUNDAY, JULY 14TH
MONDAY, JULY 15TH
TUESDAY, JULY 16TH
WEDNESDAY, JULY 17TH
THURSDAY, JULY 18TH
FRIDAY, JULY 19TH
SATURDAY, JULY 20TH
SUNDAY, JULY 21ST
MONDAY, JULY 22ND
TUESDAY, JULY 23RD
WEDNESDAY, JULY 24TH
THURSDAY, JULY 25TH
Be sure to read all the way through
to the end to find out about
an awesome giveaway!
Like so many quilters I know, I've bought my fair share of pre-cuts because I thought they were really pretty and I just knew that I would use them right away. Well, as I'm sure many of you can understand, those pre-cuts end up sitting on a shelf or in a drawer/tub/bin, etc. for a very long time before they get rediscovered.
When this hop came along, I knew exactly what I wanted to do and I decided to pull one of those fabulous Christmas pre-cut 2 1/2" strip packages that I've been holding on to - Jingle Pops, by Hoffman. (Yep! This is a really bad pictures; but by the time I realized how bad it was, I had already opened it and started cutting the strips.)
I've been playing around with some very basic blocks lately, included a variety of log cabins. I wanted to make a scrappy log cabin version, but one that had some sense of order other than just light and dark sides. I knew that making a larger block would get too "messy" for what I had in mind, so I decided to make a small block by sewing just one rotation around a consistent center.
I like the resulting 6" (6 1/2" unfinished) block and the fact that I could make quite a few blocks from a pre-cut 2 1/2" strip package. WooHoo!
I decided to go very basic with the layout and when I asked my husband to name the quilt, which he normally does, he called it Log Cabin Ground Floor. (Can you tell that he was an engineer?)
I laid out my blocks in a 7 x 8 layout with 2" (finished) sashing. I added a 4" border so my quilt finished 66" x 74." Without the border, the quilt will measure 58" x 66."
Here's a quick tutorial on how to make the block and quilt. (I say quick, but that's not really true because I have a ton of pictures.)
Fabric Requirements:
1 package of 2 1/2" x WOF strips
(I used 28 strips for my quilt, but you can use more to make a larger quilt, have a greater
variety of fabrics, or make a scrappy binding)
2 1/8 yards block centers and sashing fabric
1 1/4 yards optional 4" border
Cutting:
1) Pick 28 pre-cut 2 1/2" x WOF strips
2) From each strip, cut:
4 - 2 1/2" x 2 1/2" squares (cornerstones and log #1)
4 - 2 1/2" x 4 1/2" rectangles (logs #2 and #3)
2 - 2 1/2" x 6 1/2" rectangles (log #4)
3) From the block center/sashing fabric, cut:
27 - 2 1/2" x WOF strips, set aside three strips for the top and bottom borders
4) From the remaining 24 strips, cut:
56 - 2 1/2" x 2 1/2" squares (block centers)
99 - 2 1/2" x 6 1/2" rectangles (sashing)
14 - 2 1/2" x 8 1/2" rectangles (sashing)
Block Construction:
1) With right sides together, sew 56 block centers to 56 - randomly selected
2 1/2" log #1.
This step goes very quickly if you chain piece the blocks!
Press to log #1, away from the center.
2) With right sides together and being careful of the orientation, sew log #2 to the top of the step 1 unit.
Because the seam allowance is pointing down, you can sew with the log#2 on top and not worry about flipping the seam allowance over and creating bulkiness.
Press to log #2
This unit should measure 4 1/2" square.
3) With right sides together, sew log #3 to the left side of the step 2 unit. Again, be careful of the orientation.
Press to log #3. (In order to make pressing easier, the block is rotated to the right in the picture below.)
4) With right sides together, sew log #4 to the bottom of the step 3 unit.
Press to log #4. (Again, the block is rotated to make pressing easier.)
The block should now measure 6 1/2"
Make 56 blocks (or more if you want a larger quilt).
Quilt Layout
1) Randomly lay out blocks, with sashing and cornerstones.
(Here's a mini version of the layout.)
2) You can sew the blocks and vertical sashing into a row and them sew the horizontal sashing and cornerstones into another row and the sew the rows together;
OR
You can sew the sashing and cornerstones to the blocks to create bigger blocks that can be sewn together. That's what I did.
Basically, you'll be sewing three different blocks, which will then be sewn together.
To Make the Left Side Blocks:
1) Sew a 2 1/2" x 6 1/2" rectangle to both sides of the farthest left block of each row. Press to the sashing.
2) Sew a cornerstone to a 2 1/2" x 8 1/2" rectangle. Press to the sashing. Sew that to the bottom of the above units, except the bottom row. You should have 8 left side blocks - 7 that are complete and 1 that does not have the bottom sashing and cornerstones.
To Make the Right Blocks:
1) Sew a 2 1/2" x 6 1/2" rectangle to the right side of the farthest right block of each row. Press to the sashing.
2) Sew a 2 1/2" x 8 1/2" rectangle to the bottom of the above units, except the bottom row. You should have 8 right side blocks - 7 that have sashing on the right and bottom and 1 that just has sashing on the right side.
To Make the Center Blocks:
1) Sew a 2 1/2" x 6 1/2" sashing to the right side of all the center blocks - 40 total.
2) Set aside the 5 blocks that make up the bottom row. To the remaining 35, sew a 2 1/2" x 6 1/2" rectangle to a cornerstone and press to the sashing. Sew this to the above unit.
Quilt Top Construction
1) Sew the blocks together, in rows and press all rows in one directions.
2) Sew the 3 - 2 1/2" x WOF sashing strips that were set aside earlier into one long strip.
3) Measure the quilt top from side to side and cut two strips that measurement. Sew these strips to the top and bottom of the quilt top.
4) Cut and sew the optional 4" border to the sides first and then top and bottom of the quilt top. Press to the borders.
I used a directional fabric for my border, so I had to be careful when cutting and sewing. This did require extra fabric.
Quilt as desired. I used a poinsettia pantograph to quilt this, and I'm very happy with the results.
Although I had every intention of doing so, I did not use my extra pre-cut strips for a scrappy binding. I decided I liked the look of a solid black instead. The good news is that I now have 12 strips of this beautiful fabric to make something else. :-)
I like this quilt so much that I made a second one.
Check back tomorrow for my Springtime version.
As I said earlier, Sarah is have a giveaway.
The giveaway has ended
Complete and submit the following for your choice to win.
